CakeFest 2024: The Official CakePHP Conference

SSL bağlamı seçenekleri

SSL bağlamı seçenekleriSSL bağlamı seçeneklerinin listesi

Açıklama

ssl:// ve tls:// aktarımları için bağlamsal seçenekler.

Seçenekler

peer_name string

Kullanılan görevdeşin ismi.Bu değer yoksa akım açılırken kullanılan konağın ismine dayalı olarak tahmin edilir.

verify_peer bool

SSL sertifikası kullanımının doğrulanmasını gerektirir.

true öntanımlıdır.

verify_peer_name bool

Görevdeş isminin doğrulanması gerekir.

true öntanımlıdır.

allow_self_signed bool

Öz imzalı sertifikalara izin verilir. verify_peer gerekir.

false öntanımlıdır.

cafile string

Uzak görevdeşin kimliğini doğrulamak için verify_peer bağlam seçeneği ile kullanmak üzere yerel dosya sistemindeki Sertifika Yetkilisi dosyasının yeri.

capath string

cafile belirtilmemişse veya sertifika yerinde yoksa uygun sertifikayı bulmak için capath tarafından işaret edilen dizin araştırılır. capath doğru olarak betimlenmiş sertifika dizini olmalıdır.

local_cert string

Yerel sertifikanın dosya sistemindeki yeri. Sertifikanızı ve özel anahtarınızı içeren PEM kodlamalı bir dosya olmalıdır. Seçimlik olarak sertifika sağlayıcıların sertifika zincirini içerebilir. Ayrıca, özel anahtar local_pk ile belirtilen bir dosyayı da içerebilir.

local_pk string

Dosya sisteminde sertifika (local_cert) ve özel anahtar için ayrı dosyalar olması durumunda yerel özel anahtar dosyasının yolu.

passphrase string

local_cert dosyanızı kodlayan anahtar parolası.

verify_depth int

Sertifika zinciri çok derinse çıkılır.

Doğrulama yapılmaması öntanımlıdır.

ciphers string

Kullanılabilir şifrelerin listesi belirtilir. Dizge biçemi » ciphers(1) kılavuz sayfasında açıklanmıştır.

DEFAULT öntanımlıdır.

capture_peer_cert bool

true belirtilirse peer_certificate bağlam seçeneği görevdeşin sertifikasını içererek oluşturulur.

capture_peer_cert_chain bool

true belirtilirse peer_certificate_chain bağlam seçeneği sertifika zincirini içererek oluşturulur.

SNI_enabled bool

true atanırsa sunucu ismi belirteci (SNI) etkin olur. Böylece aynı IP adresinde çok sayıda sertifika mümkün olur.

disable_compression bool

true atanırsa TLS sıkıştırması yapılmaz. Bu, CRIME (SUÇ) saldırı vektörünü azaltmaya yardımcı olabililir.

peer_fingerprint string | array

Uzak sertifika özeti belirtilenle eşleşmezse çıkar.

Değer string türünde belirtilmişse, uzunluk aşlama algoritmasından belirlenir ("md5" için 32, "sha1" için 40 gibi).

Değer array türünde belirtilmişse, anahtarlar aşlama algoritmasının ismini, değerler umulan aşı içerir.

security_level int

Güvenlik seviyesini belirler. Belirtilmezse kütüphane öntanımlı güvenlik seviyesi kullanılır. Güvenlik seviyeleri için bkz: »  SSL_CTX_get_security_level(3).

PHP 7.2.0 ve OpenSSL 1.1.0 itibariyle kullanılabilir.

Sürüm Bilgisi

Sürüm: Açıklama
7.2.0 security_level bağımsız değişkeni eklendi. OpenSSL >= 1.1.0. gerekir.

Notlar

Bilginize: https:// ve ftps:// sarmalayıcıları için ssl:// temel aktarım olduğundan, ssl://'e uygulanan bağlamsal seçenekler ayrıca https:// ve ftps://'e de uygulanır.

Bilginize: SNI'nin (Server Name Indication - Sunucu ismi belirteci) kullanılabilmesi için PHP'nin OpenSSL 0.9.8j veya daha üst sürümü ile derlenmesi gerekir. SNI desteği olup olmadığını anlamak için OPENSSL_TLSEXT_SERVER_NAME kullanılır.

Ayrıca Bakınız

add a note

User Contributed Notes 9 notes

up
6
tianyiw at vip dot qq dot com
1 year ago
Enable SNI (Server Name Indication):
PEM must be contains certificate and private key.
<?php
$context
= stream_context_create([
'ssl' => [
'SNI_enabled' => true,
'SNI_server_certs' => [
'host1.com' => '/path/host1.com.pem',
'host2.com' => '/path/host2.com.pem',
],
]
]);
?>
up
7
website at meezaan dot net
7 years ago
There is also a crypto_type context. In older versions this was crypto_method. This is referenced on http://php.net/manual/en/function.stream-socket-enable-crypto.php
up
4
Charlie
7 years ago
I am unable to load a PEM that was generated with the stunnel tools. However, I am able to use PHP calls to generate a working PEM that is recognized both by stunnel and php, as outlined here:

http://www.devdungeon.com/content/how-use-ssl-sockets-php

This code fragment is now working for me, and with stunnel verify=4, both sides confirm the fingerprint. Oddly, if "tls://" is set below, then TLSv1 is forced, but using "ssl://" allows TLSv1.2:

$stream_context = stream_context_create([ 'ssl' => [
'local_cert' => '/path/to/key.pem',
'peer_fingerprint' => openssl_x509_fingerprint(file_get_contents('/path/to/key.crt')),
'verify_peer' => false,
'verify_peer_name' => false,
'allow_self_signed' => true,
'verify_depth' => 0 ]]);

$fp = stream_socket_client('ssl://ssl.server.com:12345',
$errno, $errstr, 30, STREAM_CLIENT_CONNECT, $stream_context);
fwrite($fp, "foo bar\n");
while($line = fgets($fp, 8192)) echo $line;
up
3
Botjan kufca
14 years ago
CN_match works contrary to intuitive thinking. I came across this when I was developing SSL server implemented in PHP. I stated (in code):

- do not allow self signed certs (works)
- verify peer certs against CA cert (works)
- verify the client's CN against CN_match (does not work), like this:

stream_context_set_option($context, 'ssl', 'CN_match', '*.example.org');

I presumed this would match any client with CN below .example.org domain.
Unfortunately this is NOT the case. The option above does not do that.

What it really does is this:
- it takes client's CN and compares it to CN_match
- IF CLIENT's CN CONTAINS AN ASTERISK like *.example.org, then it is matched against CN_match in wildcard matching fashion

Examples to illustrate behaviour:
(CNM = server's CN_match)
(CCN = client's CN)

- CNM=host.example.org, CCN=host.example.org ---> OK
- CNM=host.example.org, CCN=*.example.org ---> OK
- CNM=.example.org, CCN=*.example.org ---> OK
- CNM=example.org, CCN=*.example.org ---> ERROR

- CNM=*.example.org, CCN=host.example.org ---> ERROR
- CNM=*.example.org, CCN=*.example.org ---> OK

According to PHP sources I believe that the same applies if you are trying to act as Client and the server contains a wildcard certificate. If you set CN_match to myserver.example.org and server presents itself with *.example.org, the connection is allowed.

Everything above applies to PHP version 5.2.12.
I will supply a patch to support CN_match starting with asterisk.
up
1
consatangmail dot com
1 year ago
recommended use "ssl://" transport.

in php 5.5 ~ 7.1
ssl:// transport = ssl_v2|ssl_v3|tls_v1.0|tls_v1.1|tls_v1.2
tls:// transport = tls_v1.0

after 7.2 ssl:// and tls:// transports is same
php 7.2 ~ 7.3 = tls_v1.0|tls_v1.1|tls_v1.2
php 7.4 ~ 8.1 = tls_v1.0|tls_v1.1|tls_v1.2|tls_v1.3
up
1
gabri dot ns at gmail dot com
4 years ago
i usually download root CA certificate from https://curl.haxx.se/docs/caextract.html then put it as 'cafile' and it work almost all of the time.

the only problem i'v ever found is when the server does not properly sending intermediete CA certificate, then, you must add it manually to the file.
up
0
borbas dot geri at gmail dot com
10 years ago
I used this for Apple Push Notification Service.
Passed in a local certificate filename `cert.pem` trough local_cert option.
Worked fine, when invoked the script directly.

But when I included/required the script from a different location, it stopped working, without any explicit error message.

Resolved by passed in the full path for the file `<FullPathTo>cert.pem`.
up
-1
mechtecs at gmail dot com
5 years ago
If you want to validate the server against a local certificate, which you already saved, to further validate the target server, you have to use a fullchain.pem. Then the verify_peer option will work. So just get the server certificate, and search the root CA's pem's and copy everything into a single file. For example:

My certificate has the "GeoTrust TLS RSA CA G1" certificate in the chain, so you google that string. Go to the official digicert Geotrust page and download the "GeoTrustTLSRSACAG1.crt" certificate. Then you can use the following command to convert it into the pem format:
openssl x509 -inform DER -in GeoTrustTLSRSACAG1.crt -out GeoTrustTLSRSACAG1.crt.pem -outform PEM
up
-2
Charlie
7 years ago
It appears that "allow_self_signed" does not and cannot apply to the local_cert option.

The stunnel verify=4 option, which verifies but ignores a CA, has no analog in these settings, which is unfortunate.

Even more perplexingly, while the "openssl verify -CAfile" is successful, PHP appears unable to use the new ca/crt pair in any configuration.

I did actually link my PHP against a copy of LibreSSL 2.3.8, but PHP oddly is unable to use TLS1.1 or 1.2. It does, however, enable EC secp521r1 (of which my native OpenSSL 0.9.8e is incapable).
To Top